Whole-home Ventilators
Whole-home Ventilators | Ventilation and Air Quality | Heating and Air Conditioning | Englewood
Whether Englewood is sweltering in mid-summer or buttoned up tight against a frosty Front Range winter, the air inside your home should feel fresh, balanced, and effortless to breathe. HEP’s whole-home ventilators integrate seamlessly with your existing heating and cooling system, quietly exchanging stale indoor air for a continuous supply of filtered outdoor air. The result is a healthier living space with fewer allergens, reduced humidity swings, and more consistent temperatures in every room—without the energy loss of cracking open a window.
Our certified technicians design and install solutions that fit the character of Englewood homes, from historic bungalows to modern townhouses, and we back every job with honest pricing and a 100% satisfaction guarantee. Discover how easy it is to elevate your home’s ventilation and air quality with HEP, and start breathing easier today.
FAQs
Why is a whole-home ventilator important for homes in Englewood’s climate?
Englewood’s semi-arid, high-altitude climate means we experience cold, tightly shut-up winters and warm summers when air conditioning is often running. Modern homes are built far more airtight than older houses, which traps indoor pollutants such as cooking fumes, cleaning chemicals, pet dander, and excess moisture. A balanced whole-home ventilator continuously exchanges stale indoor air for fresh filtered outdoor air, keeping carbon-dioxide levels down and relative humidity in a healthy 30-50 % range without the energy loss you’d get from opening windows. The result is better respiratory health, less lingering odors, and protection against mold, all while maintaining indoor comfort and energy efficiency.
What’s the difference between an HRV and an ERV, and which is better for Englewood?
Both Heat-Recovery Ventilators (HRVs) and Energy-Recovery Ventilators (ERVs) capture heat from outgoing stale air and transfer it to incoming fresh air. The key difference is moisture transfer: an ERV also exchanges a portion of humidity, helping to keep indoor air from becoming overly dry in winter or too humid in summer. Because Englewood’s winter air is very dry, many homeowners prefer an ERV—it adds a bit of moisture back, reducing static shocks and dry-skin complaints. However, if your main concern is removing excess indoor humidity—say from a large family or home spa—an HRV might be better. Our technicians can test your indoor humidity profiles and recommend the optimal unit.
Will installing a whole-home ventilator lower my energy bills?
Yes—when properly selected and balanced. Instead of cracking windows (which loses all the conditioned air you’ve paid to heat or cool), a ventilator transfers up to 70-90 % of the heat that would otherwise be lost. In summer, the same core helps keep incoming fresh air cooler. According to the U.S. Department of Energy, homes that upgrade from natural infiltration (leaky windows) to a sealed shell plus a heat- or energy-recovery ventilator typically save 15-20 % on HVAC operating costs. Exact savings depend on your home’s insulation, your thermostat habits, and equipment efficiency, but most Englewood homeowners see the ventilator pay for itself in 3–7 years.
How does a whole-home ventilator tie into my existing heating and air conditioning system?
During installation we connect dedicated supply and exhaust ducts to the ventilator’s core and then tie the fresh-air supply side into your central return plenum or install separate small-diameter distribution ducts to key rooms. The unit is wired to the HVAC blower so it can run on low speed during ventilation cycles, ensuring even mixing of fresh air throughout the home. For houses without ductwork (e.g., radiant heat), we can install a stand-alone duct system in attic or joist spaces. Controls can be manual, timer-based, or automated through indoor air-quality sensors or your smart thermostat. The work is typically completed in a day with minimal disruption.
What routine maintenance is required for a whole-home ventilator?
Maintenance is simple but important: • Filters: Most units have two filters (intake and exhaust) that should be vacuumed or replaced every 3–6 months—more often if you have pets or live near construction dust. • Core cleaning: Once a year, remove and rinse the heat-exchange core with mild soap and warm water, then let it dry completely before reinstalling. • Vent hoods: Check outside wall or roof hoods twice a year for debris, snow buildup, or bird nests. • Check drains: ERVs have a small condensate drain that should be flushed annually to prevent clogs. Regular maintenance keeps airflow balanced and efficiency high; our Comfort Club plans include an annual ventilator service with the HVAC tune-up.
Are there local rebates or incentives for installing ventilation and indoor air-quality equipment in Englewood?
Yes. Xcel Energy often provides rebates of $200–$400 for qualifying HRV/ERV installations that meet ENERGY STAR® criteria. Colorado’s state-wide RENU Loan program offers low-interest financing for energy-efficiency upgrades, including whole-home ventilators, with terms up to 15 years. In addition, federal tax credits under the Inflation Reduction Act allow a 30 % credit (up to $600) on qualifying IAQ equipment and labor. Our team will handle the paperwork and provide the AHRI certificate and Model Number documentation you need for rebate submission and tax purposes.