Aprilaire And Honeywell

Aprilaire And Honeywell | Dehumidifier Installation | Heating and Air Conditioning | Dayton

Breathe easier all year long with HEP’s trusted Aprilaire and Honeywell solutions, expertly tailored for homes across Dayton. Our certified technicians size, place, and fine-tune each system to quietly whisk away excess humidity, helping you dodge sticky summers, prevent mold, and protect wood floors and furniture. Whether you need a sleek whole-home unit integrated with your existing HVAC or a powerful stand-alone option for a finished basement, we handle every step—from load calculation to final walkthrough—with the care only a local, family-owned company can provide.

Ready to reclaim your comfort? Schedule your dehumidifier installation today and experience fast appointments, upfront pricing, and workmanship backed by our Happiness Guarantee. One visit from HEP and you’ll see why Dayton homeowners trust us to keep their indoor air crisp, clean, and comfortably balanced—no matter how unpredictable Ohio weather gets.

FAQs

What advantages does a whole-home Aprilaire or Honeywell dehumidifier provide in Dayton’s humid climate?

Dayton summers routinely see outdoor humidity levels above 70%, which can push indoor relative humidity well past the recommended 30–50% range. A properly sized Aprilaire or Honeywell dehumidifier removes excess moisture from every conditioned room, helping prevent mold growth, musty odors, dust-mite infestation, and warping of wood floors or furniture. Because drier air feels cooler, you can often set your air conditioner 2–3°F higher, trimming energy bills by up to 10%. Homeowners also report better sleep, fewer allergy and asthma symptoms, and longer HVAC equipment life because the A/C no longer has to over-cycle just to wring out moisture.

How do I choose the right Aprilaire or Honeywell model for my house and HVAC system?

Model selection is based on four main factors: (1) square footage and ceiling height of the conditioned space, (2) typical indoor humidity load (number of occupants, pets, cooking/bathing frequency), (3) the capacity and configuration of your existing furnace or air handler, and (4) available ductwork access. During our in-home evaluation we measure the home, perform a Manual J moisture load calculation, and inspect your return and supply plenums. For most Dayton homes, Aprilaire models E070–E100 or Honeywell DR90/DR120 cover 2,000–5,000 sq ft. If you have a zoned system or finished basement, we may recommend multiple smaller units or a high-capacity model with dedicated ducting. We will provide a written sizing report and recommend the most efficient option.

What does the installation process involve and how long will it take?

After confirming the model and quotation, we schedule a 3-to-5-hour appointment. Our NATE-certified technicians: 1) shut off power to the HVAC system, 2) cut a precise opening in the return plenum and mount the dehumidifier on vibration-isolating brackets or the floor, 3) run an insulated supply duct to inject dry air into the main supply trunk (or a dedicated grille), 4) install a condensate drain line with back-flow trap or connect to an existing pump, 5) wire the unit to 120 V or 240 V power, tie it into your Aprilaire/Honeywell digital controller or smart thermostat, and 6) verify airflow, refrigerant pressures, and humidistat calibration. We finish by sealing all joints with mastic, insulating duct runs, and cleaning the work area. Your new system is ready the same day, with no drywall repair needed.

Will the dehumidifier integrate with my current Aprilaire or Honeywell thermostat and HVAC equipment?

Yes. Both Aprilaire and Honeywell design their whole-home dehumidifiers to communicate seamlessly with their own branded thermostats, air cleaners, and ventilation controls. If you already have an Aprilaire 8920W, 8620, or Honeywell T10/T9/T6 Pro thermostat, we can enable on-screen humidity set-points and remote monitoring through the corresponding mobile app. For other thermostat brands, we install a stand-alone digital humidistat or connect the unit to your furnace board’s dehumidification terminal (DHUM). Integration does not affect heating or cooling performance; the dehumidifier runs independently whenever indoor humidity exceeds the chosen set-point, even if the A/C is off.

What is the typical cost of professional installation in the Dayton area, and are rebates or financing available?

As of 2024, installed pricing averages: • 70–90 pint units: $2,200–$2,800 • 90–120 pint units: $2,900–$3,600 Prices include equipment, duct fittings, electrical hookup, condensate management, labor, and permit. Dayton Power & Light (AES Ohio) periodically offers $50–$100 rebates for ENERGY STAR® certified dehumidifiers; we handle the paperwork for you. We also partner with Synchrony and Wells Fargo to provide 0% APR financing options for 6–18 months, subject to credit approval. Because whole-home units reduce A/C runtime, many customers recoup the investment in 3–5 years through lower utility bills and avoided portable-unit replacements.

What maintenance and warranty coverage should I expect after installation?

Aprilaire and Honeywell whole-home dehumidifiers carry 5-year limited parts warranties when installed by a licensed contractor. We register your unit the day of installation and include a 1-year labor warranty. Maintenance is simple: replace or rinse the MERV-8/11 air filter every 6–12 months (about $12–$20), clear the condensate trap, and vacuum the exterior grille. During your annual HVAC tune-up we inspect the refrigeration circuit, blower wheel, and humidity sensor calibration. With proper care, these units typically last 12–15 years—twice as long as most portable dehumidifiers.